Instructions: Pocket Winch

Download the quick start PDF guide on how to setup and use the Dragan Systems Dragan Pod. 

Although the Dragan Pod setup is straightforward, here are the steps to help you get started!

1. Unpack the Pod components and remove the retaining clips.
2.  Assemble the tube segments to desired height. Note the recommended load reduces with length; 1-Segment:1000lbs, 2-Segments:750lbs, 3-Segments:500lbs.
   
3. Insert the foot into the bottom tube.
4. Insert the tube retaining clips
5. Insert the crown on the top segment.
6. Ensure the top pulley is in the forward position (the middle position will be used for upcoming Pocket Winch accessories).
7. Attach the Pocket Winch to the crown.
8. Unscrew the red line-retaining screws, place the line across the top of the pulley wheels, then resecure the screws.
9. Unspool the line from the Pocket Winch until there are three wraps remaining on the spool.
10. Use the Capio to attach the load and use the guy shackles to stabilize the Pod as necessary. Note: It is OK if pulley wheel(s) do not rotate during use depending on the load and condition.